Pokušajte pretraživati po ključnim riječima, kodu narudžbe ili proizvoda ili serijskom broju, npr. „CM442“ ili „tehničke informacije“
Unesite minimalno 2 znaka za pokretanje pretrage.
product picture of the emission monitoring solution GM32

GM32
emission monitoring solution

Measure aggressive gases directly and quickly – even in ATEX zones

IGM32
Please Wait (spinning wheel)
Učitavanje cijene
Cijene privremeno nisu dostupne
from CHF ??.-

Kratke specifikacije

  • Measured variables

    NO, NO2, NH3, SO2

  • Process temperature

    ≤ +550 °C

  • Ambient temperature range

    –20 °C ... +55 °C
    Temperature change maximum ±10 °C/h

  • Hazardous area approvals

    IECEx: Ex pzc op is [ia] IIC T3 Gc
    ATEX: II 3G Ex pzc op is [ia] IIC T3 Gc

Područje primjene

The GM32 in-situ gas analyzer measures SO2, NO, NO2 and NH3, pressure and temperature in the gas duct. Direct, fast and without gas sampling and transport. Due to self-monitoring, the measured values are reliable. In case of a malfunction, an early warning will be shown. For emission measurement of SO2 and NO, the GM32 is tested for suitability according to European standard EN 15267. An Ex-type with extensive safety functions and sophisticated system technology is also available.

  • For monitoring and control in flue gas purification, such as denitrification plants, desulfurization plants and converters

  • Emissions monitoring according to EU directives or local regulations


Device properties:

  • No gas sampling, no gas transport, no gas conditioning

  • Up to four measurands at the same time, plus process temperature and pressures

  • Numerous independent measuring ranges with consistent accuracy

  • Automated self-test function (QAL3) without test gases

  • Overpressure encapsulated type Ex-zone 2

Prednosti

  • Nearly uncompromised measured values measured directly in the gas duct

  • Short-term process deviations can be measured

  • Representative measurement by selection of cross-duct or measuring probe type

  • Fast on-site service possible due to modular design

  • Long maintenance-free intervals

  • Cost-effective in-situ gas analyzer — Ex-type also available

  • Low cost of installation and operation, no test gases required

Xpert odabir

  • Specijalizirani proizvodi

  • Dizajnirano za zahtjevne aplikacije

Tehnička izvrsnost

Jednostavnost

Promjenjivo

Xpert: Master your most challenging applications ©Endress+Hauser
  • Jednostavni proizvodi

  • Jednostavno je odabrati, instalirati i rukovati

Tehnička izvrsnost

Jednostavnost

  • Standardni proizvodi

  • Pouzdano, robustno i s malo održavanja

Tehnička izvrsnost

Jednostavnost

  • Vrhunski proizvodi

  • Izuzetno funkcionalno i prikladno

Tehnička izvrsnost

Jednostavnost

  • Specijalizirani proizvodi

  • Dizajnirano za zahtjevne aplikacije

Tehnička izvrsnost

Jednostavnost

Promjenjivo

FLEX odabir Tehnička izvrsnost Jednostavnost
  • F
  • L
  • E
  • X

Fundamental odabir

Udovoljite svojim osnovnim potrebama u mjernju

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Lean odabir

Jednostavno upravljajte svojim osnovnim procesima

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Extended odabir

Optimizirajte svoje procese s inovativnim tehnologijama

Tehnička izvrsnost
Jednostavnost
  • F
  • L
  • E
  • X

Xpert odabir

Ovladajte svojim najizazovnijim aplikacijama

Tehnička izvrsnost
Jednostavnost

Promjenjivo

Please Wait (spinning wheel) Loading alternative products