An automated system for pH measurements at AVR
Efficient measurement with Liquiline CDC90
AVR Waste in Botlek, Rotterdam, processes up to 1.7 million tons of residual waste per year. The waste is converted into raw materials and energy using a wide range of processes, which involve a lot of monitoring and regulation.
Richard Kooijmans and Hadji Cifci from AVR
Waste treatment plant in Botlek, Rotterdam
Results
-
Strong reduction of maintenance effort with improved work safety
-
Optimizing the yield and quality of the process
-
Ability to control measurement points remotely via any process control system or mobile device
We had to replace a sensor every two days, now it’s only once every eight months. So, we save a lot of man hours. The quality of the water treatment has improved too, which is an unbelievably big win.
AVR Waste
The challenge
Kooijmans says “With our processes –particularly water treatment – you get lots of scaling, a big build-up of scale that causes the sensors to get stuck in the fixtures. In practice, 99% of our consumption is purely due to (sensors) breakages when changing . They break off or fall while being handled. Some 18,000 man hours are involved in total!”
Savings for the company
To bring down the consumption of pH sensors and automate the process of calibration and cleaning, a fully automated system, the Liquiline Control CDC90, was installed.Kooijmans says “Now, alternating pH sensors are cleaned every four hours. Before, we had to replace a sensor every two days, now it’s only once every eight months. So, we save a lot of man hours and are saved from what is just a messy job. The quality of the water treatment has improved too, which is an unbelievably big win.”
Povezana ponuda
-
Jednostavni proizvodi
- Jednostavno je odabrati, instalirati i rukovati
Tehnička izvrsnost
Jednostavnost
-
Standardni proizvodi
- Pouzdano, robustno i s malo održavanja
Tehnička izvrsnost
Jednostavnost
-
Specijalizirani proizvodi
- Dizajnirano za zahtjevne aplikacije
Tehnička izvrsnost
Jednostavnost
Promjenjivo
| FLEX odabir | Tehnička izvrsnost | Jednostavnost |
|---|---|---|
Fundamental odabir Udovoljite svojim osnovnim potrebama u mjernju |
Tehnička izvrsnost
|
Jednostavnost
|
Lean odabir Jednostavno upravljajte svojim osnovnim procesima |
Tehnička izvrsnost
|
Jednostavnost
|
Extended odabir Optimizirajte svoje procese s inovativnim tehnologijama |
Tehnička izvrsnost
|
Jednostavnost
|
Xpert odabir Ovladajte svojim najizazovnijim aplikacijama |
Tehnička izvrsnost
|
Jednostavnost
Promjenjivo |